SIVAGURUNATHAN G

Project Name: Micron_BOISE .U.S (WASTE WATER TREATMENT PLANT)

Role& Responsibilities :

· Study and understanding of Project requirements, process description and design philosophies.

· Preparation of Block flow Diagram WWT Area as per Client Requirement

· Preparation of Process Flow Diagram WWT Area based on Block Flow Diagram

· Preparation of Equipment Layout

· Preparation of Equipment move in Layout Drawing

· Preparation of Piping 3D Model in Revit-2022 3D Software.

· Preparation of Space Management Drawing for pipe rack and interconnection piping list

· Preparation of Clash Report in Navis Manager Software

· Condition to other Discipline and Vendor.

· Preparation of piping general arrangement drawing

· Involve to final 3D model Review meeting in client meeting

Extract Bill of Material Report as per final 3D model

Project Name: Micron FAB 10A

Role& Responsibilities :

· Study and understanding of Project requirements, VMP, process description and design philosophies.

· Preparation of Equipment 3D model As Per Vendor GA Drawing.

· Preparation of Piping 3D Model in Plant 3D Software.

· Extract the Isometric Drawing in Plant 3D Software.

· Preparation of pop-out Detail drawing

· Preparation of piping general arrangement drawing

· Clash check with 3D-Model in Navis Manager Software

· Involve to final 3D model Review meeting in client meeting

· Extract Bill of Material Report as per final 3D model

Onsite Client Name : SUEZ Water Technologies & Solutions

Project Details:

Project 1:

Project: TATA Steel Limited (JAMSHEDPUR)

Client: SUEZ Water Technologies & Solutions

Role& Responsibilities :

· Study and understanding of Project requirements, PID, process description and design philosophies.

· Preparation of Equipment 3D model As Per Vendor GA Drawing.

· Preparation of Civil 3D model based on Equipment Layout in Plant 3D software.

· Preparation of Piping 3D Model in Plant 3D Software.

· Extract the Isometric Drawing in Plant 3D Software.

· Preparation of piping general arrangement drawing

· Preparation of wall cutout Detail Drawing.

· Preparation of Pump Foundation Detail Drawing.

· Nozzle orientation Mark up Given to Equipment Vendor.

· Clash check with 3D-Model in Navis Manager Software

· Involve to Regional Team Review meeting.

· Involve to Client Review meeting for TSL.

Project 2: SCANDEX TEXTILE INDUSTRIES 7.2 MLD MBR BASED EFFUENT TREATMENT PLANT BANGLADESH.

Client: SUEZ Water Technologies & Solutions

Role& Responsibilities :

· Study and understanding of Project requirements, PID, process description and design philosophies.

· Preparation of Equipment 3D model As Per Vendor GA Drawing.

· Preparation of Civil 3D model based on Equipment Layout in Plant 3D software.

· Preparation of Piping 3D Model in Plant 3D Software.

· Extract the Isometric Drawing in Plant 3D Software.

· Preparation of piping general arrangement drawing

· Preparation of wall cutout Detail Drawing.

· Preparation of Pump Foundation Detail Drawing.

· Nozzle orientation Mark up Given to Equipment Vendor.

· Clash check with 3D-Model in Navis Manager Software

· Involve to Regional Team Review meeting.

· Coordinate with Electrical and E&I Team

· Preparation of Bill of Material

Project 3:

Project: SHARAF WASHING AND DYEING INDUSTRIES 7.2 MLD MBR BASED

EFFUENT TREATMENT PLANT, BANGLADESH.

Client: SUEZ Water Technologies & Solutions

Role& Responsibilities :

· Study and understanding of Project requirements, PID, process description and design philosophies.

· Preparation of Equipment 3D model As Per Vendor GA Drawing.

· Preparation of Civil 3D model based on Equipment Layout in Plant 3D software.

· Preparation of Piping 3D Model in Plant 3D Software.

· Extract the Isometric Drawing in Plant 3D Software.

· Preparation of piping general arrangement drawing

· Preparation of wall cutout Detail Drawing.

· Preparation of Pump Foundation Detail Drawing.

· Nozzle orientation Mark up Given to Equipment Vendor.

· Clash check with 3D-Model in Navis Manager Software

· Involve to Regional Team Review meeting.

· Coordinate with Electrical and E&I Team

· Preparation of Bill of Material.

Project 4:

Project: NZ-DENIM LIMITED.7.2 MLD MBR DENIM DYEING TEXTILE

EFFUENT TREATMENT PLANT.

Client: SUEZ Water Technologies & Solutions

Role& Responsibilities :

· Study and understanding of Project requirements, PID, process description and design philosophies.

· Preparation of Equipment 3D model As Per Vendor GA Drawing.

· Preparation of Civil 3D model based on Equipment Layout in Revit 3D-software.

· Preparation of Piping 3D Model in Revit 3D-software

· Clash check with 3D-Model in Navis Manager Software

· Involve to Regional Team Review meeting.

· Preparation of Bill of Material

Project 1:

Project: LEUNA 2020+ (TOTAL)

Client: MMEC MANNESMANN

Role& Responsibilities :

· Study and understanding of Project requirements, P&ID's, process description and design philosophies.

· Preparation of Piping Layout in Aveva E3D SOFTWARE

· Preparation of Equipment 3D model

· Preparation of piping general arrangement drawing

· Preparation of piping Support Detail Drawing.

Project 2:

Project: BASRAH UPGRADING FCC PROJECT

FEED SERVICE (HYDRO TREATING UNIT)

Client: JGC Corporation

Role& Responsibilities :

· Study and understanding of Project requirements, P&ID's, process description and design philosophies.

· Preparation of Piping Layout in PDMS SOFTWARE

· Preparation of Equipment 3D model

· Preparation of piping general arrangement drawing

· Extract Bulk MTO Report

Project 3:

Project : HHS GRACE

Client: KURITA WATER INDUSTRIES LTD.

Role& Responsibilities :

· Study and understanding of Project requirements, P&ID's, process description and design philosophies.

· Preparation of 3d model Equipment as per data sheet in plant 3D soft ware .

· Preparation of 3d model of Front piping rout as per GA Drawing.

· Preparation of around Piping Connectivity

· Preparation of general Arrangement Drawing.

· Involve to client Review meet.

· Extract Bulk MTO Report.

Project 4:

Project : HICKORY RUN

Client: CMI Energy-U.S.A

Role& Responsibilities :

· Preparation of Piping 3D Model in CadWork's Software.

· Preparation of isometrics drawing based on client standard

· Preparation of support detail drawing based on client standard

· Preparation cumulative of Bill of materials based on the drawing.

Project 5: LNG PUMP & TRUCK LOADING SKID

Client: OKRA ENERGY-U.S.A

Role& Responsibilities :

· Preparation of 3D Skid Model in Auto plant3D

· Preparation of Equipment model

· Preparation of Skid layout drawings,

· Preparation of Isometrics Drawing.,

· Preparation of support detail drawing

· Preparation cumulative of Bill of materials based on the drawing.

· Preparation of general Arrangement Drawing.

Project 6:

Project : FORT ST JAMES GREEN ENEGRY (40 MWe BIOMASS FIRED POWER PLANT)

Client: FSE Energy, U.S.A

Role & Responsibilities:

· Study and understanding of Project requirements, P&ID's, process description and design philosophies.

· Preparation of Piping Layout in AUTO PLANT 3D

· Preparation of Isometric Drawing

· Preparation of piping general arrangement drawing

· Preparation of piping support detail drawing.

· Preparation cumulative of Bill of materials based on the drawing.

Project 7:

Project: LOUISIANA ENERGY & POWER AUTHORITY.

Client: Victory Energy, U.S.A.

Project Description:

Heat Recovery steam generator power plant Project for achieving piping design in IBR & non IBR pipe lines as per ASME in 31.1 STD, 31.3 STD. Developed piping general arrangement drawing and Isometric, detail drawings and structural TIE IN support detail drawings.

Role & Responsibilities:

· Study and understanding of Project requirements, P&ID's, process description and design philosophies.

· Preparation of piping general arrangement drawing as per Piping and instrumentation diagram.

· Preparation of pipe sizing and pipe thickness calculation based on the ASME31.1, ASM31.3.

· Review and approval of Isometric drawings.

· Review and approval of piping detail drawing.

· Review and approval of piping support detail drawing.

· Review and approval of Bill of materials based on the drawing.

Project 8:

Project: YANNUZZI.

Client: Victory Energy, U.S.A.

Project Description:

Power plant Project for achieving piping design in IBR & non IBR pipe lines as per ASME in 31.1 STD, 31.3 STD. Developed piping general arrangement drawing and Isometric, detail drawings.

Role & Responsibilities:

· Preparation of piping general arrangement drawing.

· Review and approval of Isometric drawings.

· Review and approval of piping detail drawing.

· Review and approval of Bill of materials based on the drawing.

Project 1:

Project: RAMGARH COMBINED CYCLE STAGE-IV, Rajasthan (2x25 MW Power Plants)

Client: Tecpro System Ltd.

Project 2:

Project: M/S.ULTRA CEMENT LIMITED, RAWAN (1x30 MW Power Plant)

Client: Tecpro System Ltd.

Project Description:

Power plant Project for achieving piping design in IBR & non IBR pipe lines as per ASME in 31.1 STD, 31.3 STD. Developed piping general arrangement drawing and Isometric, detail drawings and structural support detail drawings.

Role & Responsibilities:

· Study and understanding of Project requirements, P&ID's, process description and design philosophies.

· Involved in various detailed engineering activities includes preparation of Mechanical datasheet, Technical specification, Material Requisitions, Purchase requisitions etc.,

· Involved in vendor documents review and generating technical queries.

· Conversion of piping layout drawings in to piping Isometric drawings.

· Checking of Isometric drawings.

· Preparation of Piping support arrangement drawings

· Preparation of Detail drawing

· Bill of Material generation based on drawing.

· Knowledge in ASME31.1, ASME 31.3 Standards.

· Piping drafting Autocad-2014.

Project 1:

Project: M/S, Arab paper manufacturing, Co-Saudi (3x16MW power plant)

Client: IJT in Chennai.

Project 2:

Project: M/S.MSR.Mega Bio-power plant, Hyderabad (1x8MW power plant)

Client: Vale project service. In Chennai.

Project 3:

Project: M /S, Madras Cements.Ltd. Ariyalur. Tamilnadu. ( 1x20MW power plant)

Client: Thermax Limited in Chennai.

Role & Responsibilities:

· Conversion of piping layout drawings in to piping Isometric drawings.

· Checking of Isometric drawings.

· Preparation of Detail drawing.

· Bill of Material generation based on drawing.

· Knowledge in ASME31.1, ASME 31.3.

· Piping drafting- Autocad-2010.