Minitab
MUHAMAD NORAKMAL OMAR
Manufacturing Engineer III
Bukit Mertajam
Summary
Manufacturing Engineer with over 6 years of diversified design, manufacturing, product transfer, product decommissioning and project experience in high volume production. High-performing professional with extensive experience designing and improving manufacturing systems. Skilled in reviewing technical specifications, creating manufacturing instructions and developing tools. Strong analytical skills and committed to improving efficiency and effectiveness.
Overview
9
9
years of professional experience
3
3
years of post-secondary education
2
2
Languages
Work History
Manufacturing Engineer III
Boston Scientific Medical Device
09.2023 - Current
- Process SME for Crimping process in DES product.
- Reduced material waste by designing efficient cutting patterns and reusing scrap materials where possible.
- Mentored junior engineers, fostering a culture of continuous learning and professional growth within the team.
- Developed comprehensive training programs for new hires, ensuring a smooth onboarding process and rapid integration into the team.
- Led value stream mapping exercises to identify areas of improvement within the end-to-end supply chain process, resulting in more effective inventory management practices.
- Project lead for process improvement on reducing the DMF Residual Solvent in the product.
- Collaborated with cross-functional teams to develop innovative manufacturing solutions, resulting in cost savings and improved product quality.
- Improved overall equipment effectiveness by implementing predictive maintenance strategies and root cause analysis techniques.
- Applied mechanical troubleshooting skills to develop effective solutions for quality products.
Manufacturing Engineer II
Boston Scientific Medical Device
03.2023 - 09.2023
- Improved manufacturing efficiency by streamlining production processes and implementing lean methodologies.
- Optimized assembly line layouts to maximize productivity and improve overall workflow efficiency.
- Evaluated manufacturing equipment performance regularly, recommending upgrades or replacements as needed to maintain optimal efficiency.
- Developed technical documentation, including standard operating procedures, work instructions, and engineering drawings to support manufacturing operations.
- Trained and mentored junior engineers, fostering a culture of continuous learning and professional development within the team.
- Collaborated with cross-functional teams to develop innovative solutions for complex engineering challenges.
- Performed acceptance testing and measurements on electronic components and assemblies to verify system compliance.
Manufacturing Engineer I
Boston Scientific Medical Device
03.2021 - 03.2023
- Partnered with R&D department to incorporate new technologies into existing manufacturing processes seamlessly.
- Led Kaizen events focused on continuous improvement within various areas of the manufacturing environment.
- Assisted in supplier selection and evaluation processes, contributing to improved supply chain performance.
- Contributed to achieving safety targets by proactively addressing potential hazards and promoting a strong safety culture throughout the facility.
- Increased capacity utilization by identifying bottlenecks within the production process and implementing targeted improvements.
- Project Lead on the production line expansion.
- Managed capital projects from concept through completion, ensuring timely delivery and adherence to budget constraints.
- Performed acceptance testing and measurements on electronic components and assemblies to verify system compliance.
Manufacturing Engineer
Boston Scientific Medical Device
10.2018 - 03.2021
- Supported continuous improvement efforts by participating in Kaizen events and implementing 5S methodologies.
- Contributed to cost savings initiatives by identifying opportunities for material reduction and process optimization.
- Addressed non-conformances using root cause analysis methods, resulting in improved product reliability over time.
- Assisted in updating and maintaining the manufacturing process documentation, facilitating consistent production procedures across all shifts.
- Provided training to operators on new processes, enhancing their skills and improving overall productivity levels.
- Participated in root cause analysis investigations, helping resolve quality issues and improve overall product performance.
- Project Lead on production line expansion
Production Executive/Engineer
KERRY INGREDIENTS (M) SDN. BHD
02.2017 - 10.2018
- Managed the daily production activities under GMP guidelines with a team of 35 operators and number of engineers.
- Controlled total production and quality control labour to meet quality and deadline standards.
- Applied strong logistical skills to streamline and improve processes to deliver high quality results.
- Developed an efficient workflow process by managing the supply chain, monitoring production by vendors, contractors and production staff.
- Performed production trials for new product together with R&D team.
- Achievement : Increase the production rate for downpacking process by 7.5% and reduce the number of leaking pouch.
- Wrote standard operating procedures and adjusted policies to meet changing demands.
- Recommended process improvements to enhance product quality.
- Managed resource utilization and continuous improvements to streamline operations and reduce costs.
Engineer Trainee
ASTA CHEMICALS SDN BHD
12.2015 - 02.2016
- Produced and reviewed process instrumentation specifications and hydraulic calculations.
- Developed communication skills.
- Classify and sort all the documents related with the process and factory.
Engineer Trainee
TORAY PLASTIC MALAYSIA SDN BHD
12.2014 - 02.2015
- Monitoring and record the data for improving waste water treatment plant.
- Evaluated P&ID's to inspect data received on waste water treatment plant revamp project.
- Implemented and tracked project progress with Microsoft Project software.
- Achievement : Cost saving for waste water treatment process.
Education
Bachelor of Chemical And Material Engineering - Chemical And Material Engineering
UNIVERSITY OF AUCKLAND
Auckland, New Zealand 02.2014 - 05.2016
Bachelor of Chemical Engineering -
UNIVERSITY KUALA LUMPUR MALAYSIAN INSTITUTE OF CHEMICAL AND BIOENGINEERING TECHNOLOGY
01.2013 - 05.2013
Foundation in Engineering - undefined
MARA COLLEGE KUALA
NERANG, KedahSkills
Analytical skills
Affiliations
- Science Technology Engineering Mathematic (STEM) and Young Professional Network (YPN) Member of BSC Penang
- Executive committee member of the Malaysian Student Society of Auckland
- Executive committee member of the Malaysian BERSATU Games New Zealand
- Project Manager for Barbeque Orientation 2015
- Project Manager for Junior Induction Program 2015
- Media Officer for Ehara Mai! Amazing Race 2015 UNIVERSITY KUALA LUMPUR MALAYSIAN INSTITUTE OF CHEMICAL AND BIOENGINEERING TECHNOLOGY (MICET)
- Project Manager for Fsc Australia/ New Zealand Dinner 2013 MARA COLLEGE KUALA NERANG
- Student Representative Council Member in MARA College Kuala Nerang
- Participant of Volunteering Event In Cambodian 2012(Committee)
- Participant of Mentoring Program for SPM Students of MARA Junior Science College Pendang, Malaysia.
- Member of Election Commission Community MARA College
Accomplishments
- Resolved product issue through 6 Steps Problem Solving.
- Used Microsoft Excel to develop yield reporting.
- Collaborated with team of 6 in the development of manufacturing process for Valve.
Software
AutoCAD
Solidwork
Microsoft Office
Aspen Hysys
VMG Simulation
Adobe Photoshop
Adobe Sofware
Timeline
Manufacturing Engineer III
Boston Scientific Medical Device
09.2023 - Current
Manufacturing Engineer II
Boston Scientific Medical Device
03.2023 - 09.2023
Manufacturing Engineer I
Boston Scientific Medical Device
03.2021 - 03.2023
Manufacturing Engineer
Boston Scientific Medical Device
10.2018 - 03.2021
Production Executive/Engineer
KERRY INGREDIENTS (M) SDN. BHD
02.2017 - 10.2018
Engineer Trainee
ASTA CHEMICALS SDN BHD
12.2015 - 02.2016
Engineer Trainee
TORAY PLASTIC MALAYSIA SDN BHD
12.2014 - 02.2015
Bachelor of Chemical And Material Engineering - Chemical And Material Engineering
UNIVERSITY OF AUCKLAND
02.2014 - 05.2016
Bachelor of Chemical Engineering -
UNIVERSITY KUALA LUMPUR MALAYSIAN INSTITUTE OF CHEMICAL AND BIOENGINEERING TECHNOLOGY
01.2013 - 05.2013
Foundation in Engineering - undefined
MARA COLLEGE KUALA
Similar Profiles
Baradt GanesanBaradt Ganesan
Business System Analyst III at Boston Scientific Medical Device (Malaysia) Sdn. BhdBusiness System Analyst III at Boston Scientific Medical Device (Malaysia) Sdn. Bhd
Priya MohanPriya Mohan
Microbiologist II at Boston scientific Medical DevicesMicrobiologist II at Boston scientific Medical Devices
Keshvindran Shandana DassKeshvindran Shandana Dass
Manufacturing Engineer at Boston Scientific Medical DevicesManufacturing Engineer at Boston Scientific Medical Devices