M.S. Selvam

Responsible for quality functions and to the QA/QC activities at the site for the project

• QA/QC PLAN: Prepare quality procedure, inspection and test plan checklist and documentation
• Raise (RFI) Request for Inspection for Instrument activities whenever these are Hold point or Witness point
• Field inspection of installed equipment/materials, documentation of field report, punch list for complete works
• Site activity inspection and monitoring to ensure compliance with approved procedures, specifications, industry standards and drawings
• Ensure that measuring & testing equipment’s is calibrated properly prior to use on test activity
• Maintain all the equipment maintenance and service report for audit purpose
• Calibration, loop Stimulation of field instruments like Pressure, Flow, Level, Temperature transmitters, and Pressure switches
• Calibration, testing and erection of all pneumatic & smart instruments
• Good knowledge about Motor Operated Valve (MOV) several types of ROTORK, LIMITORQUE and AUMA, also limit settings trouble shootings installation and calibration & maintenance
• Inspecting all in time instruments as per the data- sheet and verifying at site
• The operation of the same to meet the technical requirement
• Trouble shooting of variable types of (Pressure, Flow, Level) Transmitters-Analogue & Digital like Yokogawa, Fisher Rosemount, ABB, Honeywell, Melanesian Displacer Type 3200, etc.
• Maintenance of Pneumatic and Hydraulic equipment and Control valves (Diaphragm & Piston), Calibration of various types of valves etc.
• Temperature Sensor like RTD & Thermocouple
• For calibration source operations like DRUCK & FLUKE (loop calibrators), and HART COMMUNICATOR 275,375, 475 & TREX
• SMART FIELD COMMUNICATOR 103S (HONEY WELL)
• Electrical Wiring, Piping, Cable Laying & Panels
• Control Panels Wiring and Maintenance Work of Effluent Treatment Plants, Reverse Osmosis/Desalination, Water and Waste Water Treatment Plants
• Coordination with Senior Engineer and Preparation of QAP, Quality Control Procedures, ITP for all Electrical and Instrumentation Activities
• Field Erection of Panels, Cable Trays, Instrument Junction Box, Power Distribution Board, Canopies Switches, Motor Operated Valve, Emergency Shut Valve, Flow Control Valve, Flow Element, Flow Orifice, Pressure Indicator, PT, FT, and LT
• Interpret technical documentation like data sheet, vendor manual & trouble shoot flowchart and understand the preventive and predictive maintains principle of analyzer
• Through Knowledge in Calibration of Field Mounted instrument like PT, LT, FT etc
• Pressure transmitter, Flow transmitter and Temperature transmitter, Level transmitter and control valves
• Troubleshoot wide range of process analyzer and water analyzer equipment using proper test equipment and diagnostics and provide documentation
• Witnessing of Final Acceptance Test (FAT) for Control Valves (Make: IL, Siemens, ABB, Fisher, Mansolin, and Flowserve)
• Various transmitters (Pressure, Level, Temperature and Flow) control valves, Switches, Gas Detectors and analyzer
• Coordinate with Quality Control Department for Handing over all Site Related Documents submit to owner for Approval
• Oversee all inspection and testing work activities
• Final Checking of all Field mounted instruments against P & ID Drawings
• Supervision for the installation and testing of fire alarm systems as per standard requirements
• Inspection of installed electrical equipment’s as motor controllers, power & lighting panel
• Site activity inspection and monitoring to ensure compliance with approved procedures, specifications, industry standards and drawings
• Erection, calibration, Function test and commissioning of Fire and Gas Instrument's
• Familiar with Alarm PLC panels, Gas Detector's and Flame Detector's & PAGA, CCTV and ACS system Commissioning and Function test
• Plant control system that is covered: Distributed Control System (DCS), Programmable Logic Controllers (PLC) for plant equipment safeguarding, Fire Detection System (FDIC), and various field instruments
• Vibration Sensor
• Worked on Vibration Monitoring System of Bentley Nevada 3300, 3500 series
• I have good Experience of Vibration probe Installation, Probe Health Checking and Probe Characteristics checking by using TK3-2E calibrator
• Instrumentation Field: Calibration, Erection, Testing & Commissioning of complete C&I works in Oil & Gas, interconnection diagram & Signal flow diagram, Analog & Digital communication
• Worked on Vibration Monitoring System of Bentley Nevada 3300, 3500 series
• I have good Experience of Vibration probe Installation, Probe Health Checking and Probe Characteristics checking by using TK3-2E calibrator
• HART communicators (EMERSON 475, AMS TREX)
• FLUKE 707 Process meter
• FLUKE 754 Documenting process calibrator
• Experience in shutdown valve calibration
• Experience in YOKOGAWA, EMERSON DCS & SIEMENS PLC System
• Conducted final inspections on completed products prior to shipment, ensuring customer satisfaction with delivered goods.

• Ø Preparation of Work plan and attend daily Coordination meeting with client
• Ø Coordinate with external contractors, vendors for corrective work.
• Ø Responsible for quality functions and to the QA/QC activities at the site for the project.
• Ø QA/QC PLAN: Prepare quality procedure, inspection and test plan checklist and documentation.
• Ø Raise (RFI) Request for Inspection for Instrument activities whenever these are Hold point or Witness point.
• Ø Field inspection of installed equipment/materials, documentation of field report, punch list for complete works.
• Ø Site activity inspection and monitoring to ensure compliance with approved procedures, specifications, industry standards and drawings.
• Ø Ensure that measuring & testing equipment’s is calibrated properly prior to use on test activity.
• Ø Monitor and Track Equipment breakdown history, parts replacement history.
• Ø Maintain all the equipment maintenance and service report for audit purpose.
• Ø Coordination with Senior Engineer and Preparation of QAP, Quality Control Procedures, ITP for all Electrical and Instrumentation Activities.
• Ø Final Checking of all Field mounted instruments against P & ID Drawings.
• Ø Witnessing of Final Acceptance Test (FAT) for Control Valves (Make: IL, Siemens, ABB, Fisher, Mansolin, and Flow Serve).
• Ø Coordinate with Quality Control Department for Handing over all Site Related Documents submit to owner for Approval.
• Ø Liaise with the Client Representative at site for all the quality and inspection matters.
• Ø Provide continuous QC oversight or Inspections at the construction work site to verify the work is compliant with the technical requirement and general practice standards including safe execution.
• Ø Coordination with Senior Engineer and Preparation of QAP, Quality Control Procedures, ITP for all Electrical and Instrumentation Activities.
• Ø Final Checking of all Field mounted instruments against P & ID Drawings.
• Ø Supervision for the installation and testing of fire alarm systems as per standard requirements
• Ø Inspection of installed electrical equipment’s as motor controllers, power & lighting panels
• Ø In charge in all construction work specified in the approved plan
• Ø Site activity inspection and monitoring to ensure compliance with approved procedures, specifications, industry standards and drawings.
• Ø Ensure that measuring and testing equipment’s is calibrated properly prior to use on test activity. Supervises installation test and commissioning of power distribution s ystem MV/LV transformer, switches, standby generators and other electrical equipment.
• Ø Submit daily activity reports, field clarification for any deviation and conflicts of designed andissued for construction drawings.
• Ø Field Erection of Panels, Cable Trays, Instrument Junction Box, Power Distribution Board, Canopies Switches, Motor Operated Valve, Emergency Shut Valve, Flow Control Valve, Flow Element, Flow Orifice, Pressure Indicator, PT, FT, and LT.
• Ø Coordinate with Quality Control Department for Handing over all Site Related Documents submit to owner for Approval.
• Ø Oversee all inspection and testing work activities.
• Ø Liaise with the Client Representative at site for all the quality and inspection matters.
• Ø Provide continuous QC oversight or Inspections at the construction work site to verify the work is compliant with the technical requirement and general practice standards including safe execution.
• Ø Coordination with Senior Engineer and Preparation of QAP, Quality Control Procedures, ITP for all Electrical and Instrumentation Activities.

• Ø Coordinate with external contractors, vendors for corrective work.
• Ø Responsible for quality functions and to the QA/QC activities at the site for the project.
• Ø QA/QC PLAN: Prepare quality procedure, inspection and test plan checklist and documentation.
• Ø Raise (RFI) Request for Inspection for Instrument activities whenever these are Hold point or Witness point.
• Ø Field inspection of installed equipment/materials, documentation of field report, punch list for complete works.
• Ø Site activity inspection and monitoring to ensure compliance with approved procedures, specifications, industry standards and drawings.
• Ø Ensure that measuring & testing equipment’s is calibrated properly prior to use on test activity.
• Ø Monitor and Track Equipment breakdown history, parts replacement history.
• Ø Maintain all the equipment maintenance and service report for audit purpose.
• Ø Calibration, loop Stimulation of field instruments like Pressure, Flow, Level, Temperature transmitters, and Pressure switches.
• Ø Calibration, testing and erection of all pneumatic & smart instruments
• Ø Good knowledge about Motor Operated Valve (MOV) several types of ROTORK, LIMITORQUE and AUMA, also limit settings trouble shootings installation and calibration& maintenance.
• Ø Inspecting all in time instruments as per the data- sheet and verifying at site. The operation of the same to meet the technical requirement
• Ø Trouble shooting of variable types of (Pressure, Flow, Level) Transmitters-Analogue & Digital like Yokogawa, Fisher Rosemount, ABB, Honeywell, Mansoneilan Displacer Type 3200, etc.
• Ø Maintenance of Pneumatic and Hydraulic equipment and Control valves (Diaphragm & Piston), Calibration of various types of valves etc. Temperature Sensor like RTD & Thermocouple (Labom, Altop)
• Ø For calibration source operations like DRUCK & FLUKE (loop calibrators), and HART COMMUNICATOR 275,375, 475 & TREX. SMART FIELD COMMUNICATOR 103S (HONEY WELL)
• Ø Installation of Underground Earthing Works.
• Ø Electrical Wiring, Piping, Cable Laying & Panels.
• Ø Excavation Works for Erection and Installation of Electrical Cables
• Ø Control Panels Wiring and Maintenance Work of Effluent Treatment Plants, Reverse Osmosis/Desalination, Demineralization, Water and Waste Water Treatment Plants
• Ø Coordination with Senior Engineer and Preparation of QAP, Quality Control Procedures, ITP for all Electrical and Instrumentation Activities.
• Ø Field Erection of Panels, Cable Trays, Instrument Junction Box, Power Distribution Board, Canopies Switches, Motor Operated Valve, Emergency Shut Valve, Flow Control Valve, Flow Element, Flow Orifice, Pressure Indicator, PT, FT, and LT.
• Ø Final Checking of all Field mounted instruments against P & ID Drawings.
• Ø Through Knowledge in Calibration of Field Mounted instrument like PT, LT, FT etc.
• Ø Experience in cable segregation and carrying out the cabling and tubing work in the field as well.
• Ø Perform Instrument & Control activities as per drawings, specifications and project documents in accordance with the project field procedures.
• Ø Witnessing of Final Acceptance Test (FAT) for Control Valves (Make: IL, Siemens, ABB, Fisher, Mansolin, and Flow Serve).
• Ø Coordinate with Quality Control Department for Handing over all Site Related Documents submit to owner for Approval.
• Ø Liaise with the Client Representative at site for all the quality and inspection matters.
• Ø Provide continuous QC oversight or Inspections at the construction work site to verify the work is compliant with the technical requirement and general practice standards including safe execution.
• Ø Coordination with Senior Engineer and Preparation of QAP, Quality Control Procedures, ITP for all Electrical and Instrumentation Activities.
• Ø Final Checking of all Field mounted instruments against P & ID Drawings.
• Ø Supervision for the installation and testing of fire alarm systems as per standard requirements
• Ø Inspection of installed electrical equipment’s as motor controllers, power & lighting panels
• Ø In charge in all construction work specified in the approved plan
• Ø Site activity inspection and monitoring to ensure compliance with approved procedures, specifications, industry standards and drawings.
• Ø Ensure that measuring and testing equipment’s is calibrated properly prior to use on test activity. Supervises installation test and commissioning of power distribution system MV/LV transformer, switches, standby generators and other electrical equipment.
• Ø Submit daily activity reports, field clarification for any deviation and conflicts of designed and issued for construction drawings.
• Ø Field Erection of Panels, Cable Trays, Instrument Junction Box, Power Distribution Board, Canopies Switches, Motor Operated Valve, Emergency Shut Valve, Flow Control Valve, Flow Element, Flow Orifice, Pressure Indicator, PT, FT, and LT.
• Ø Coordinate with Quality Control Department for Handing over all Site Related Documents submit to owner for Approval.
• Ø Oversee all inspection and testing work activities.

• Ø Responsible for quality functions and to the QA/QC activities at the site for the project.
• Ø QA/QC PLAN: Prepare quality procedure, inspection and test plan checklist and documentation.
• Ø Raise (RFI) Request for Inspection for Instrument activities whenever these are Hold point or Witness point.
• Ø Field inspection of installed equipment/materials, documentation of field report, punch list for complete works.
• Ø Site activity inspection and monitoring to ensure compliance with approved procedures, specifications, industry standards and drawings.
• Ø Ensure that measuring & testing equipment’s is calibrated properly prior to use on test activity.
• Ø Maintain all the equipment maintenance and service report for audit purpose.
• Ø Coordination with Senior Engineer and Preparation of QAP, Quality Control Procedures, ITP for all Electrical and Instrumentation Activities.
• Ø Witnessing of Final Acceptance Test (FAT) for Control Valves (Make: IL, Siemens, ABB, Fisher, Mansolin, and FlowServe).Various transmitters (Pressure, Level, Temperature and Flow) control valves, Switches, Gas Detectors and analyzer.
• Ø Coordinate with Quality Control Department for Handing over all Site Related Documents submit to owner for Approval.Oversee all inspection and testing work activities.
• Ø Coordination with Senior Engineer and Preparation of QAP, Quality Control Procedures, ITP for all Electrical and Instrumentation Activities.
• Ø Final Checking of all Field mounted instruments against P & ID Drawings.
• Ø Supervision for the installation and testing of fire alarm systems as per standard requirements
• Ø Inspection of installed electrical equipment’s as motor controllers, power & lighting panel
• Ø Site activity inspection and monitoring to ensure compliance with approved procedures, specifications, industry
• standards and drawings. Erection, calibration, Function test and commissioning of Fire and Gas Instrument's,

• Ø Preparation of Work plan and attend daily Coordination meeting with client
• Ø Coordinate with external contractors, vendors for corrective work.
• Ø Responsible for quality functions and to the QA/QC activities at the site for the project.
• Ø QA/QC PLAN: Prepare quality procedure, inspection and test plan checklist and documentation.
• Ø Raise (RFI) Request for Inspection for Instrument activities whenever these are Hold point or Witness point.
• Ø Field inspection of installed equipment/materials, documentation of field report, punch list for complete works.
• Ø Site activity inspection and monitoring to ensure compliance with approved procedures, specifications, industry standards and drawings.
• Ø Ensure that measuring & testing equipment’s is calibrated properly prior to use on test activity.
• Ø Monitor and Track Equipment breakdown history, parts replacement history.
• Ø Maintain all the equipment maintenance and service report for audit purpose.
• Ø Coordination with Senior Engineer and Preparation of QAP, Quality Control Procedures, ITP for all Electrical and Instrumentation Activities.
• Ø Final Checking of all Field mounted instruments against P & ID Drawings.
• Ø Witnessing of Final Acceptance Test (FAT) for Control Valves (Make: IL, Siemens, ABB, Fisher, Mansolin, and Flow Serve).
• Ø Coordinate with Quality Control Department for Handing over all Site Related Documents submit to owner for Approval.
• Ø Liaise with the Client Representative at site for all the quality and inspection matters.
• Ø Provide continuous QC oversight or Inspections at the construction work site to verify the work is compliant with the technical requirement and general practice standards including safe execution.
• Ø Coordination with Senior Engineer and Preparation of QAP, Quality Control Procedures, ITP for all Electrical and Instrumentation Activities.
• Ø Final Checking of all Field mounted instruments against P & ID Drawings.
• Ø Supervision for the installation and testing of fire alarm systems as per standard requirements
• Ø Inspection of installed electrical equipment’s as motor controllers, power & lighting panels
• Ø In charge in all construction work specified in the approved plan
• Ø Site activity inspection and monitoring to ensure compliance with approved procedures, specifications, industry standards and drawings.
• Ø Ensure that measuring and testing equipment’s is calibrated properly prior to use on test activity. Supervises installation test and commissioning of power distribution s ystem MV/LV transformer, switches, standby generators and other electrical equipment.
• Ø Submit daily activity reports, field clarification for any deviation and conflicts of designed andissued for construction drawings.
• Ø Field Erection of Panels, Cable Trays, Instrument Junction Box, Power Distribution Board, Canopies Switches, Motor Operated Valve, Emergency Shut Valve, Flow Control Valve, Flow Element, Flow Orifice, Pressure Indicator, PT, FT, and LT.
• Ø Coordinate with Quality Control Department for Handing over all Site Related Documents submit to owner for Approval.
• Ø Oversee all inspection and testing work activities.
• Ø Liaise with the Client Representative at site for all the quality and inspection matters.
• Ø Provide continuous QC oversight or Inspections at the construction work site to verify the work is compliant with the technical requirement and general practice standards including safe execution.
• Ø Coordination with Senior Engineer and Preparation of QAP, Quality Control Procedures, ITP for all Electrical and Instrumentation Activities.
• Conducted final inspections on completed products prior to shipment, ensuring customer satisfaction with delivered goods.

• Ø Coordinate with Quality Control Department for Handing over all Site Related Documents submit to owner for Approval.
• Ø Oversee all inspection and testing work activities.
• Ø Liaise with the Client Representative at site for all the quality and inspection matters.
• Ø Provide continuous QC oversight or Inspections at the construction work site to verify the work is compliant with the technical requirement and general practice standards including safe execution.
• Ø Coordination with Senior Engineer and Preparation of QAP, Quality Control Procedures, ITP for all Electrical and Instrumentation Activities.
• Ø Final Checking of all Field mounted instruments against P & ID Drawings.
• Ø Supervision for the installation and testing of fire alarm systems as per standard requirements
• Ø Inspection of installed electrical equipment’s as motor controllers, power & lighting panels
• Ø In charge in all construction work specified in the approved plan
• Ø Site activity inspection and monitoring to ensure compliance with approved procedures, specifications, industry standards and drawings.
• Ø Ensure that measuring and testing equipment’s is calibrated properly prior to use on test activity.
• Ø Submit daily activity reports, field clarification for any deviation and conflicts of designed andissued for construction drawings.
• Ø Bus-bar with 415V power supply to carry out the functional check ofthe modules.
• Ø Relay setting and parameterization. Secondary current injection for relay functional test (for ACBpanels)
• Ø Trouble shooting of the modules and cubicles, loop-checking for the interfacing cables.
• Ø Testing of Lighting Transformers, lighting distribution boards [Emergency & Normal].
• Ø Preparation of pre commissioning check lists, test reports, as built drawings, preparing and maintaining the records of commissioning details.
• Ø Testing &commissioning over current, over voltage, earth fault relays, motor management relays, transformer protection relays, under voltage relays, over voltage relays use secondary injection set
• Ø Testing for primary injection test for CT, bus bar conduct resistance, bus bar hipot, 6.6kv HT, LT,panel testing, and cable hi-pot.
• Ø Commissioning for panel function check, troubleshooting, panel wiring modification.
• Ø Testing for transformer buchholz relay, pressure alarm, temperature alarm, & function, VFD, MCC, UPS, 24&110vdc Battery charger, Switchgear, PHF, Capacitor Bank and penstock testing with SCADA, PLC.
• Ø Preparation of pre commissioning check lists, test reports, as built drawings, preparing and maintaining the records of commissioning details.
• Ø Testing of MV switchgear and MCC panels - insulation resistance test for main bus bar, ductor test of main bus (end to end) (contact resistance test).

• Ø Field Erection of Panels, Cable Trays, Instrument Junction Box, Power Distribution Board, Canopies Switches, Motor Operated Valve, Emergency Shut Valve, Flow Control Valve, Flow Element, Flow Orifice, Pressure Indicator, PT, FT, and LT.
• Ø Final Checking of all Field mounted instruments against P & ID Drawings.
• Ø Through Knowledge in Calibration of Field Mounted instrument like PT, LT, FT etc.
• Ø Experience in cable segregation and carrying out the cabling and tubing work in the field as well.
• Ø Bus-bar with 415V power supply to carry out the functional check of the modules.
• Ø Relay setting and parameterization. Secondary current injection for relay functional test (for ACB panels)
• Ø Trouble shooting of the modules and cubicles, loop-checking for the interfacing cables.
• Ø Preparation of pre commissioning check lists, test reports, as built drawings, preparing and maintaining the records of commissioning details.
• Ø Testing &commissioning over current, over voltage, earth fault relays, motor management relays, transformer protection relays, under voltage relays, over voltage relays use secondary injection set