DERENERIO G. ABEDO JR.

Company Overview: Engineering Procurement and Engineering.

Client: Exxon Mobil

CRISP (Chemical Refinery Integrated Singapore Plant Project)

• Equipment Installation, Erection and Pre-commissioning
• Coordinated and supervise the Sub-constructor team regarding the Erection/Installation construction activities
• Static Equipment Erection/Installation activities such as Pressure Vessel, Column, Filters, Furnace, Heat Exchanger, Coolers, Cooling Towers and Tanks
• Mechanical Piping installation
• Rotating Equipment Final Inspection Installation Prior to Precom & Commissioning Activities of Steam Turbine, Compressors, Air Fin Fan Coolers/Fan/Blowers, Pumps, Agitator/Mixers and Skid/Packages
• Pre-Commissioning Activities of Static Equipment (Final Closure/Box-up) and Rotating Equipment (Motor Solo Run, Lube Oil Flushing and Mechanical Run Test)
• Punchlist verification and closed
• Permit to work Issuer
• CRISP (Chemical Refinery Integrated Singapore Plant Project) - Jurong Island, Singapore
• Managed equipment repair projects, adhering to strict deadlines while maintaining high-quality standards.
• Ensured safety compliance by conducting regular inspections and enforcing adherence to safety procedures.
• Created and maintained daily and weekly reports for upper management.
• Monitored daily progress and work quality to provide guidance and direction to mechanical team and installers.
• Monitored safety compliance to maintain strict standards and protect team members from harm.
• Managed efficient teams of up to 35 workers.

Company Overview: Processing and Packaging Plant - Longlands, Hastings Hawkes Bay, New Zealand

• Responsible for automated and non-automated machinery, equipment, robotic and conveyors Breakdown, Corrective & Preventive Maintenance servicing
• Carried out Welding and Fabrication
• Daily monitoring of the Machines, Equipment, Robotics, Conveyors, and Pneumatic & Hydraulic system in a good condition and safe for operation
• (Automated and non-automated)
• Processing and Packaging Plant - Longlands, Hastings Hawkes Bay, New Zealand

Company Overview:

Client: OQ8 DUQM REFINERY Project. - Al-Duqm Al'Wusta Sultanate of Oman

• Static Final Closure Authorization 'Box-Up' activities of Pressure Vessel, Column, Filters, Reformer, Furnace, Heat Exchanger, Coolers, Cooling Towers and Tanks
• Rotating Equipment Final Inspection Installation Prior to Precom & Commissioning Activities of Steam Turbine, Compressors, Air Fin Fan Coolers/Fan/Blowers, Pumps, Agitator/Mixers and Skid/Packages
• Pre-Comm & Commissioning Activities of Static and Rotating Equipment (Motor Solo Run, Lube Oil Flushing and Steam Turbine / Mechanical Run Test)
• Enhanced team productivity by streamlining workflow processes and implementing efficient scheduling systems.
• Led successful project completions under tight deadlines, coordinating effectively across multiple teams.
• Implemented safety protocols to minimize workplace accidents and maintain compliance with industry standards.

Company Overview: Engineering Procurement and Construction.

Client: Residential and High rise building

• Execute HVAC system, fire-protection system, plumbing & sanitary pipelines and Structural of Multi-Level Building construction
• Estimate costs and compute bill of materials and quantity for all related MEPFS items
• Direct Site Supervision of Multi-Level Building Construction related to MEPFS
• Develop accurate layouts, assembly drawings and details
• Prepared site progress reports and project schedule and report to Project Manager
• Established strong working relationships with clients through exceptional communication skills, fostering trust and collaboration.
• Wrote, reviewed and edited technical document in accordance with template requirements.
• Participated in formal internal design reviews of proposed products and components.
• Provided input to team lead regarding areas for process and procedural improvement.
• Reviewed technical drawings developed by CAD technicians and drafters.
• Enhanced safety protocols during construction projects, ensuring compliance with national standards and reducing workplace accidents.
• Enhanced team performance by implementing structured onboarding program for new engineers, reducing ramp-up time.
• Collaborated with other departments to facilitate successful project completion.
• Documented and developed engineering procedures and processes.
• Conducted technical evaluations of engineering designs and test results.
• Monitored and evaluated engineering performance to recommend improvements.
• Performed complex calculations to analyze and optimize engineering processes.

Company Overview: Engineering and Costruction

Client: Taft Hydro Energy (Global Hydro)

3X5.5MW Francis Turbine Taft, Eastern Samar, Philippines

• Managed multiple projects simultaneously while adhering to strict timelines without compromising quality or performance outcomes.
• Hydro Power Plant Erection & Installation of Generator, Turbine, Turbine Parts, Piping and Steel Structural
• HV, MV, LV Cable laying, Termination, Gland & Fixing
• Switchyard Erection and Installation
• Pre-Com & Commissioning
• 3X5.5MW Francis Turbine (GLOBAL HYDRO) - Taft Hydro Energy, Taft, Eastern Samar, Philippines
• Provided technical expertise during the development of proposals and presentations for potential clients, leading to increased project opportunities and revenue growth for the company.
• Ensured adherence to safety protocols and industry standards while supervising the installation of various mechanical equipment.
• Drafted assemblies, models, and other technical drawings.
• Performed pre-construction, quality and safety management, as well as constructability review, start-up and commissioning.
• Reviewed designs and counseled clients on courses of action to remedy issues while staying under-budget and sticking to timelines.

Company Overview: Maintenance/Turnaround Project

Client: PETRO RABIGH TURNAROUND PROJECT 2020 - OIL & GAS REFINERY & PETROCHEMICAL

• Major maintenance activity of Turbines and Compressors (Disassembly & Assembly) and Balance of Plant (BOP)
• Prepared/Generate Method Statement of Rotating Equipment Turnaround activity
• Prepared JSA of Rotating equipment Activity
• Permit to work (PTW) Issuer
• Ensured quality control with meticulous inspection of completed work, addressing any discrepancies promptly.
• Improved equipment efficiency by conducting thorough inspections and implementing regular maintenance procedures.
• Conducted comprehensive risk assessments prior to commencing new work assignments, implementing appropriate mitigation strategies where required.
• Maintained adequate inventory of spare parts to prevent critical downtime.
• Maintained detailed records of all project activities for accurate reporting purposes and informed decisionmaking.
• Coordinated mechanical repair and maintenance activities.
• Monitored and motivated employees, tracking and documenting activities, correcting problems and implementing improvement plans to boost quality of mechanical work.
• Scheduled, assigned and monitored maintenance programs for mechanical and related systems.
• Developed standard operating procedures to encourage consistency of work from team members and contractors.
• Scheduled and oversaw maintenance, repair and installation activities.
• Supervised team of installers and mechanics to complete work on time and to company standards.
• Organized ongoing maintenance schedules to boost system performance.
• Monitored priorities and liaised between maintenance team and management, delegating tasks to complete on time.
• Enhanced customer satisfaction ratings by motivating team members to strengthen quality and increase productivity.
• Monitored safety compliance to maintain strict standards and protect team members from harm.
• Monitored daily progress and work quality to provide guidance and direction to mechanics and installers.
• Efficiently assisted service workers with problematic transactions to maintain customer satisfaction and quickly rectify issues.

Company Overview: Engineering and Construction

Client: PASAR (Philippine Associated Smelting and Refinery) PROJECT - TURNAROUND AND ACID PLANT 1 UPGRADE, ISABEL LEYTE, PHILIPPINES

• Erection and Installation of Plant Upgrade and Major Maintenance of Rotating, Static and Piping Inspection activities as per ITP
• Ensures that construction materials and structural elements meet project specifications and industry standards & monitor construction processes, inspect installations, and conduct tests to verify compliance with safety and quality requirements Maintain detailed records of inspections, including observations, non-conformance reports, and corrective actions taken
• Hand over and commissioning acceptance test Inspection
• Contributed to the continuous improvement of company processes by staying up-to-date with the latest industry trends and best practices in mechanical inspection.
• Enhanced workplace safety by implementing strict inspection protocols and ensuring all mechanical systems adhered to industry standards.
• Followed safety protocols while handling hazardous materials.
• Provided feedback to production team regarding product quality.
• Updated quality control records and reports.
• Recorded inspection and test results on data sheets.
• Followed standard operating procedures for inspections and tests.
• Increased overall equipment reliability through meticulous attention to detail during inspections and diligent follow-up on necessary repairs.
• Developed strong relationships with vendors, facilitating quick resolution of any discrepancies found during inspections or warranty claims processing.

Company Overview:

Client: Souhtern Province Electric (SPE)/ GE

TRACK 4A 1400 MW GAS-FUELLED COMBINE-CYCLE POWER PLANT - 2 X GE 9HA.02 GAS TURBINE, Pasir Gudang, MALAYSIA

• Erection and Installation of Major Equipment of Single Shaft Combine Cycle Power Plant (Gas Turbine, Steam Turbine, Heat Recovery Steam Generator (HRSG) and Mechanical Piping)
• Preparation of material take off
• Oversee the work involved in installing the systems
• Performing inspections of the installation
• Established strong relationships with suppliers and vendors to ensure timely delivery of materials at competitive prices.
• Attended project planning meetings to coordinate mechanical system designs with structural and architecture teams, mitigate design conflicts, and coordinate delivery timelines.
• Developed technical documentation to standardize engineering procedures, promoting consistency across projects.
• Performed pre-construction, quality and safety management, as well as constructability review, start-up and commissioning.

Company Overview: Engineering Procurement and Construction

Client: AES Philippines/San Miguel Corporation

600MW(2X300) COAL FIRED POWER PLANT PROJECT - GE (Supercritical Steam Turbine and Generator), PHILIPPINES

Company Overview: Engineering Procurement and Engineering

Client: Societe Algerienne de Production de l’Electricite

RAS DJINET POWER PLANT PROJECT (RDPP), ALGERIA - 1200 MW (3x400MW) GAS-FUELED COMBINED CYCLE THERMAL POWER PLANTS SEIMENS (SGT5-4000F / SST5-3000 / SGen5-2000H), ALGERIA

Company Overview: Engineering Procurement and Engineering

Client: USTYURT GAS CHEMICAL COMPLEX PROJECT (UGCC)/LOTTE Chemicals

UZBEKISTAN - UZ-KOR GAS CHEMICAL Gas Separation / Ethylene / Polyethylene / Polypropylene / Energy Supply Plant, UZBEKISTAN

Company Overview: Engineering and Construction

Client: Hyundai Heavy Industries/ADGAS, IGD (Integrated Gas Development) PROJECT, ABU DHABI, UAE - LIQUEFIED NATURAL GAS (LNG), ABU DHABI UAE

• Job Pack or Method Statement Preparation and Review regarding construction activities that will guide them to Construction Activities.
• Inspection activities as per ITP of erection and installation of the following:

ROTATING (Steam Turbine, Gas Turbine, Compressors(Centrifugal/Reciprocating), Pumps & Blowers and Fans.

STATIC (Column, Tower, Reactor, Tanks, Electrostatic Precipitator”ESP”, Flue Gas Desulfurization”FGD”, SCORE Furnace, HRSG, Steam Drum & Boiler)

STEEL STRUCTURE

Ensures that construction materials and structural elements meet project specifications and industry standards & monitor construction processes, inspect installations, and conduct tests to verify compliance with safety and quality requirements. Maintain detailed records of inspections, including observations, non-conformance reports, and corrective actions taken.

PIPING (Installation and Line Check)

HVAC (Chiller & Ducting)

• Played a key role in the successful completion of large-scale projects by diligently inspecting all critical components for defects or irregularities prior to installation.
• Assisted in developing inspection and testing protocols.
• Provided feedback to production team regarding product quality.
• Followed safety protocols while handling hazardous materials.
• Updated quality control records and reports.
• Recorded inspection and test results on data sheets.
• Monitored product quality at all stages of production process.
• Followed standard operating procedures for inspections and tests.
• Contributed to a positive work environment by fostering open communication channels between technicians, engineers, and management regarding equipment erection and installation.

Company Overview: Operation and Maintenance

Client: General Authority of Civil Aviation (GACA)

5MW(2x2.5MW) SAFARI COLTD - KINGDOM OF SAUDI ARABIA

• Responsible for the Operation and Maintenance of Power Plant Equipment and BOP.
• Supervised day-to-day functions of plant.
• Coached workers on company standards and efficiency.
• Led safety meetings and promoted adherence to company policies for a safer working environment for all employees involved in the plant operation activities.
• Reduced downtime through proactive maintenance scheduling and timely repairs on machinery.
• Monitored safety practices and made changes or recommendations.
• Developed comprehensive preventive maintenance programs that significantly extended the life of critical machinery components while minimizing repair expenses.
• Conducted root cause analyses to identify areas of potential improvement in plant operations, leading to increased productivity.
• Supervised a team of technicians, fostering a positive work environment that encouraged collaboration and continuous improvement.
• Troubleshot equipment to reduce service calls and downtime.
• Monitored daily and weekly key performance indicators to maintain on-track status.

Company Overview: CEMENT PLANT, POWER PLANT & WT/STP EQUIPMENT OPERATION AND MAINTENANCE, TAHAMAH, KINGDOM OF SAUDI ARABIA

• Handle Scheduling of Mechanical Maintenance Servicing of Power Plant Facilities such as Gas Turbine and its Rotating auxiliary equipment. Planning and undertaking scheduled maintenance of Marine Diesel Engine and Gas Turbine and main Rotating equipment of cement plant area such as Kiln, Limestone Crusher, Raw Mill (Vertical and Horizontal) and Cement Mill and its Auxiliary equipment (Static and Rotating).
• Conducted root cause analysis to troubleshoot equipment issues and implemented preventive maintenance programs, reducing equipment downtime significantly.
• Conducted in-depth failure analysis to identify root causes, preventing recurrence of mechanical failures.
• Troubleshot and diagnosed equipment issues, quickly made plans for repairs and monitored use to rectify issues.
• Tested newly installed systems, closely monitoring functionality and adherence to operating specifications.

Company Overview: Operation and Maintenance

5MW MIRRLESS BLACKSTONE / 2X4 NIGATA 12V40X - PHILIPPINES

Client: Air Liquide Philippines

• Responsible to maintain reliable power plant operation to continuous providing demand power supply to Air Separating Unit & Utilities.
• Execute Maintenance activity of main Engine and BOP.

Company Overview: Operation and Maintenance 112.5MW(3X37.5MW) GEOTHERMAL STEAM TURBINE MAINTENANCE SHUTDOWN SERVICING - PHILIPPINES

• Preventive Maintenance Servicing Activities (Steam Turbine & BOP)
• Used hoisting and rigging equipment to move heavy machinery and equipment.
• Replaced defective parts of machines and adjusted clearances and alignment of moving parts.
• Adhered to all workplace safety policies, regulations and compliances.
• Aligned and leveled machines using precision measuring instruments to avoid unnecessary wear and tear.
• Conducted comprehensive inspections of machinery to identify potential problems and ensure optimal performance.
• Improved workplace safety with diligent adherence to protocols, lockout/tagout procedures, and hazard identification.
• Enhanced equipment reliability by performing regular maintenance and repairs on industrial machinery.
• Inspected and examined all machinery and equipment to detect malfunctions or irregularities.
• Inserted shims, adjusted tension on nuts and bolts and positioned parts, using hand tools and measuring instruments with 100% accuracy.
• Disassembled machinery parts and categorized properly before moving to storage.
• Ensured proper lubrication of moving components by adhering to a strict preventive maintenance schedule based on manufacturer recommendations.
• Maintained mechanical, electrical and pneumatic systems to keep systems working together correctly.
• Increased machinery lifespan by implementing rigorous schedule for parts replacement and lubrication.
• Reduced machinery wear and tear with introduction of predictive maintenance program.
• Ensured compliance with health and safety regulations, conducting regular equipment safety checks.
• Implemented standard safety procedures to prevent hazards related to industrial machinery and equipment.
• Resolved mechanical issues using both technical and manual skills.
• Monitored equipment performance to confirm proper and efficient function.
• Implemented preventive maintenance measures to decrease emergent issues.
• Kept track of equipment maintenance schedules using computerized maintenance management systems.
• Conducted regular machinery inspections to ensure compliance with safety and quality standards.
• Prevented production halts by swiftly diagnosing and fixing mechanical faults in critical machinery.