C. Kalyanasundaram

To be in a position where a substantial contribution can be made to the company through learnt skills and gained experience.

• International Driver's License

• Diagnose and repair loop powered instruments with DCS and PLC
• Loop checking of all instruments.
• Cable Termination, Cable laying work and Cable Glanding work.
• Calibrations and installation of all field instruments.
• Conduct scheduled preventative maintenance activities.
• Control valve service and maintenance.
• Troubleshooting of field instruments (Differential Pressure Transmitter, Pressure Transmitter, Level Transmitter, Flow Transmitter, Temperature Element and Level Displacer Type).
• Prioritize maintenance activities ensuring all equipment within the facility are serviced to an acceptable standard in a timely and safe manner.
• Provide emergency support to all productions.
• Support to Electrical jobs.
• Support to Automation of Packing Support.

• Plant Shutdown Maintenance schedule Preparation & Leadership.
• Carrying out Shift maintenance.
• Carrying out break down maintenance.
• Preparing calibration report for control valves and transmitters.
• Preventive maintenance orders closing in SAP.
• Updating history of equipment in SAP.
• Maintenance and troubleshooting of Process control instruments and electrical equipment.
• Preventive, breakdown, shutdown and scheduled maintenance of DCS and field Instruments.
• Erection and commissioning of the ongoing Projects of the Company.
• To implement the recommendations for the improvement to prevent recurrence of failure, according to the equipment failure analysis.
• Preventive Maintenance Program preparation and maintaining procedures for Distributed Control System activities, Process Online Instruments and Online Analyzers.
• Handling of contract employers both internal and external.
• Up keeping the Safety norms in the work environment.
• Preventive maintenance planning, scheduling & Execution.
• Material handling and inventory control.

• Calibrations and installation of all field instruments.
• Cable Termination, Cable laying and Cable Glanding work.
• Hydrostatic Level calculations for Closed and Open Vessels.
• Control valve service and maintenance.
• Level Transmitters (Pressure based, Ultrasonic, Guided wave Radar, Float operated) Calibration and Trouble Shooting.
• Good at Mass Flow, Magnetic Flow meter, Ultrasonic clamp type flow transmitter installation and Troubleshooting.
• Possess a sound experience at Using Hand Held Communication Terminals (HART 475, Yokogawa BT 200) and Device Parameters for Setup.
• Loop checking and Basic Check on Yokogawa Centum XL DCS.
• Loop checking and Basic Check on Siemens, ABB and Honeywell.
• Boiler Management system. From PLC Output, Sequence & Instrument Checking.
• Good at understanding P & I Diagrams, and able to draw for small Loops.

• Performs maintenance on Rotating Equipments are Gas turbines, Variable Speed Motors and Gas Compressors Protective system, startup/shutdown sequence.
• Vibration and governing system of Gas Turbines.

• ABB, Siemens Metering and process GC installation, diagnostic, validation, troubleshooting issues from detector, valves and electronics boards.
• AMETEK, ABB, CEMS, H2S, SO2, O2, CO2 and moisture analyzer installation, service, diagnostic, validation and calibration.
• Analyzers (pH, conductivity and ORP) and Detectors calibration and maintenance.
• Commissioning of Emerson stack SOX, NOX, on line air quality analyzer for Captive power plant (CPP).
• Installation, diagnostics, validation, calibration and troubleshooting of process GC, Metering GC, and CEMS analyzer.
• PGC, process and metering Gas Chromatography and H2S, SO2, O2, CEMS, Moisture analyzer installation, diagnostic, verification and validation.

• Pressure Transmitters: Yokogawa, Rosemount, Foxboro, Siemens, E&H, Azbil
• Mass flow meters: Khorne, ABB, Rose mount (Micro motion Elite)
• Magnetic flow meter: Yokogawa, Khorne, E&H
• RADAR Level Transmitter: Rosemount, E&H.
• Ultrasonic Level Transmitter: Siemens, E&H, And Ultrasonic Flow Transmitter: Flexus ADM 8027
• Temperature Transmitter: Rosemount, Yokogawa, Honeywell, Siemens, E&H
• PH & ORP: Yokogowa, E&H, Forbes Marshall and Analyser Transmitter: Millenium II
• Smart Positioner: Siemens, ABB, Flow Serve, Azbil.

• HART Field Communicator: EMERSON 275,375,475 and TREX
• Communicator: Yokogawa BT 200
• Feeder: Yokogawa (CA-150, CA 12E)
• Temperature calibrator: Fluke 724

• Implementation of Allen Bradley PLC
• Projects involved in a Oil Refinery plant JURONG LUBES EXPANSION PROJECT at ExxonMobil Refinery in Singapore.

• Proficiently work in Computer and Computer applications.
• Have good knowledge in MS-Word, MS-Excel and Power Point.
• Good working knowledge in SMART DRAW (Drawing Software) application.

• Father's Name: Mr. Chockalingam
• Date of Birth: 03/15/91
• Gender: Male
• Nationality: Indian

WSQ Training Completed for Supervise Workplace Safety And Health In Process Plant (SWSHPP), WSQ Training Completed for Supervise Work In Confined Space Operation (SWCS), WSQ Training Completed for Supervise Work In Work At Height (SWWH), WSQ Training Completed for Operate Boom Lift course (OPL), H2S & BA COMPETENCY (LEVEL II) TRAINING

• Diagnose and repair loop powered instruments with DCS and PLC
• Loop checking of all instruments.
• Cable Termination, Cable laying work and Cable Glanding work.
• Calibrations and installation of all field instruments.
• Conduct scheduled preventative maintenance activities.
• Control valve service and maintenance.
• Troubleshooting of field instruments (Differential Pressure Transmitter, Pressure Transmitter, Level Transmitter, Flow Transmitter, Temperature Element and Level Displacer Type).
• Prioritize maintenance activities ensuring all equipment within the facility are serviced to an acceptable standard in a timely and safe manner.
• Provide emergency support to all productions.
• Support to Electrical jobs.
• Support to Automation of Packing Support.

• Plant Shutdown Maintenance schedule Preparation & Leadership.
• Carrying out Shift maintenance.
• Carrying out break down maintenance.
• Preparing calibration report for control valves and transmitters.
• Preventive maintenance orders closing in SAP.
• Updating history of equipment in SAP.
• Maintenance and troubleshooting of Process control instruments and electrical equipment.
• Preventive, breakdown, shutdown and scheduled maintenance of DCS and field Instruments.
• Erection and commissioning of the ongoing Projects of the Company.
• To implement the recommendations for the improvement to prevent recurrence of failure, according to the equipment failure analysis.
• Preventive Maintenance Program preparation and maintaining procedures for Distributed Control System activities, Process Online Instruments and Online Analyzers.
• Handling of contract employers both internal and external.
• Up keeping the Safety norms in the work environment.
• Preventive maintenance planning, scheduling & Execution.
• Material handling and inventory control.

• Calibrations and installation of all field instruments.
• Cable Termination, Cable laying and Cable Glanding work.
• Hydrostatic Level calculations for Closed and Open Vessels.
• Control valve service and maintenance.
• Level Transmitters (Pressure based, Ultrasonic, Guided wave Radar, Float operated) Calibration and Trouble Shooting.
• Good at Mass Flow, Magnetic Flow meter, Ultrasonic clamp type flow transmitter installation and Troubleshooting.
• Possess a sound experience at Using Hand Held Communication Terminals (HART 475, Yokogawa BT 200) and Device Parameters for Setup.
• Loop checking and Basic Check on Yokogawa Centum XL DCS.
• Loop checking and Basic Check on Siemens, ABB and Honeywell.
• Boiler Management system. From PLC Output, Sequence & Instrument Checking.
• Good at understanding P & I Diagrams, and able to draw for small Loops.

• Performs maintenance on Rotating Equipments are Gas turbines, Variable Speed Motors and Gas Compressors Protective system, startup/shutdown sequence.
• Vibration and governing system of Gas Turbines.

• ABB, Siemens Metering and process GC installation, diagnostic, validation, troubleshooting issues from detector, valves and electronics boards.
• AMETEK, ABB, CEMS, H2S, SO2, O2, CO2 and moisture analyzer installation, service, diagnostic, validation and calibration.
• Analyzers (pH, conductivity and ORP) and Detectors calibration and maintenance.
• Commissioning of Emerson stack SOX, NOX, on line air quality analyzer for Captive power plant (CPP).
• Installation, diagnostics, validation, calibration and troubleshooting of process GC, Metering GC, and CEMS analyzer.
• PGC, process and metering Gas Chromatography and H2S, SO2, O2, CEMS, Moisture analyzer installation, diagnostic, verification and validation.

• Pressure Transmitters: Yokogawa, Rosemount, Foxboro, Siemens, E&H, Azbil
• Mass flow meters: Khorne, ABB, Rose mount (Micro motion Elite)
• Magnetic flow meter: Yokogawa, Khorne, E&H
• RADAR Level Transmitter: Rosemount, E&H.
• Ultrasonic Level Transmitter: Siemens, E&H, And Ultrasonic Flow Transmitter: Flexus ADM 8027
• Temperature Transmitter: Rosemount, Yokogawa, Honeywell, Siemens, E&H
• PH & ORP: Yokogowa, E&H, Forbes Marshall and Analyser Transmitter: Millenium II
• Smart Positioner: Siemens, ABB, Flow Serve, Azbil.

• HART Field Communicator: EMERSON 275,375,475 and TREX
• Communicator: Yokogawa BT 200
• Feeder: Yokogawa (CA-150, CA 12E)
• Temperature calibrator: Fluke 724

• Implementation of Allen Bradley PLC
• Projects involved in a Oil Refinery plant JURONG LUBES EXPANSION PROJECT at ExxonMobil Refinery in Singapore.

• Proficiently work in Computer and Computer applications.
• Have good knowledge in MS-Word, MS-Excel and Power Point.
• Good working knowledge in SMART DRAW (Drawing Software) application.

• Father's Name: Mr. Chockalingam
• Date of Birth: 03/15/91
• Gender: Male
• Nationality: Indian