ARUN KUMAR PALANISAMY

Experienced commissioning leader with strong focus on team collaboration and achieving results. Skilled in systems integration, quality assurance, and project management. Adaptable in dynamic environments and reliable in meeting changing needs. Known for effective communication and problem-solving in high-stakes operations.

• Pressure Transmitter
• Level Transmitter
• Flow Transmitter
• Temperature Transmitter
• Vibration Transmitter
• Control Valve
• Emergency Shutdown valve
• MOV Valve
• Thermocouple & RTD

• AMS TREX DEVICE COMMUNICATOR
• HART COMMUNICATOR
• 4-20mA CALIBRATOR (FLUKE)
• DIGITAL MULTIMETER
• PORTABLE PRESSURE CALIBRATOR
• PNEUMATIC HAND PUMP & RELEVANT TOOLS

• Before execution, all test equipment shall be prepared and calibrated,
  the necessary connector.
• The complete instrument loop shall be tested as one system, and when the necessary adjustment shall be made Associated alarms and trip actions of PCIMS and/or board-mounted instruments shall be checked.
• Based on the sequence, each loop will be checked from field devices, through the process interface equipment and to the control room consoles via a data highway
• A signal will be generated from the field devices, and the test data will be filled in, and then stamped on the loop wiring diagrams under the supervision of the client with signature by both
• The loop interfaced with the packaged local panel shall be loop-tested by simulating/checking signals at the interface terminal block directly.
• Loop/Function test is divided by a two-group operation. One group to be in the field (Field Technician) and the other group to be positioned in the control room or in front of local panel (Operator Station Technician).
• The operation of equipment using the plant-wide Distributed Control System (DCS), ESD, FGS and correct operation of the associated graphics on the Man Machine Interface (MMI).
  

• Isolate power from field device from the input/output electronics for new installations and ensure that the loop power fuses are removed or disconnects in the CBJB or ICJB are open.
• Reconnect power for the field device as required.
• Verify the instrument tag number and the 1/0 point on the instrument schedule.
• Assist the outside person, as required, in locating the instrument in the field.
• Verify the instruments are terminated correctly (loop-powered or field-powered).
• Verify the correct size and install the instrument power fuse as required.
• Communicate the instrument range and fail-safe position to the outside person in the field.
• Stroke Analog and Digital outputs for field verification by the outside person in the field.
• Verify the correct fail action and operation of AO’s & DO’s according to the DCS* control program, P&ID’s and documentation.
• Verify that the IPCS display/indication range, instrument range and documentation agree.
• Verify that redundant inputs display the same value (Applies to hardwired display only) Verify Digital Output &
• Digital Input convention for proper lamp action.
• Check graphics for proper light response in the correct place in the DCS System.
• Zero calibrate the instrument to IPCS (DCS) graphics as required.
• Verify all differential pressure flow instruments are using square root linearization in the IPCS (DCS) or in the
  transmitter (but not both) (use an upscale input from the transmitter).
• Work with operations to verify Critical instruments and SIS function properly.
• Document daily activities, generate a punch list of instruments requiring work and distribute it to the
  appropriate functions.
• Use the instrument schedule or loop checklist to document each loop as it is verified.
• Document problems and changes as they are completed.
• When the job is complete, deliver the completed documentation to the person in charge.

• Positively identify instruments in the field using the P&ID, IPCS graphics, or instrument location plan.
  Visually inspect instrument installation. Correct or record deficiencies (i.e., conduit covers, plugs, flow
  direction, etc.).
• Verify the tag number and correct the 1/0 number for the instrument.
• Connect the communicator and monitor power up.
• Configure the instrument with the tag number and range information.
• Verify the failure direction of the instrument.
• Perform zero/span trim to the IPCS graphics.
• For pressure sensing devices, function check by driving the instrument mid-scale by applying pressure (if possible) or with a communicator or simulator.
• Verify valve position, operation, and fail-safe condition.
• Verify motor I/O.
• Electrical responsible for verifying proper motor operation and proper rotation.
• Perform minor troubleshooting tasks in the field (10-15 minutes) and communicate all problems with the inside person. If the problem cannot be resolved, this item will be put on the problem punch list.
• Mark the instrument with green tape when complete if everything is correct.
• Mark instruments with red tape that need to be worked on.
• Work with operations to verify (SIS) and SIS function properly.

• Efficient planning and coordination of activities
• Excellent Leadership qualities
• Team management Skills
• Excellent Time Management to finish the
  work scheduled on Time

• Appreciation Certificate for best performance by TR & DAEWOO E&C in Duqm Refinery and Petrochemical Industries Project, Oman
• Safety Award in Duqm Refinery and Petrochemical Industries Project, Oman
• Appreciation Certificate for Outstanding Employee by ELECO in Duqm Refinery and Petrochemical Industries Project, Oman
• Appreciation Certificate for Completion of project assignment by TR at Al-Zour Refinery Project, Al-Khiran, Kuwait.
• Safety Award from ELECO at Al-Zour Refinery Project, Al-Khiran, Kuwait
• Appreciation Certificate from TR in Petronas Rapid Project, Pengerang Johor Baharu, Malaysia.

Name:  ARUN KUMAR

Father's name:  PALANISAMY

Date of birth: 05-04-1992

Age: 32

Gender:  Male

Nationality:  Indian

Marital Status:  Single

Languages: Tamil, English, Hindi

Number: B6657092

Date of Issue: 05/12/2023
Date of Expiry: 04/12/2033

I hereby declare that all the above stated details are true and the documents will be produced whenever
it's necessary.