Anirudh Bhosale

QE LNG 3 & 4 DCS Upgrade (Qatar) (Apr 2025):

• Worked as Hardware engineer for QG-3 & 4 plant shutdown activities which included:
• Power & grounding recommendations
• Serial Card TB verification for Controller & IO card flashing
• Hardware SAT
• Network switches firmware upgrade

Thermal Testing Facility. (Qatar) (March 2025):

• Worked as Hardware engineer for DeltaV System/Marshalling cabinets which includes documents such as:
• IO assignment update
• Console GA & Wiring drawing
• And Pre-FAT for south region cabinets that include tests such as:
• Hardware visual & BOM checks
• Power & grounding check

Sapele LPG Propane Storage and Offloading Facility. (Nigeria) (March 2025):

• Worked as Hardware engineer for DeltaV System/Marshalling cabinets & SJJB Pre-FAT that include tests such as:
• Hardware visual & BOM checks
• Power & grounding check
• IO testing
• Diagnostics & redundancy checks

PDO Habr RMS (Oman) (Jan 2025 – Feb 2025):

• Worked as Hardware engineer for As-built documentation
• QE LNG 2 DCS Upgrade (Qatar) (Oct 2024 – Nov 2024):
• Worked as Hardware engineer for QG-2 plant shutdown activities which included:
• Power & grounding recommendations
• Serial Card TB verification for Controller & IO card flashing
• Hardware SAT
• Network switches firmware upgrade

PDO Habr Wellhead. (Oman) (Sep 2024 - Apr 2025):

• Working as Hardware engineer on DeltaV CIOC/CSLS CHARMS System/Marshalling cabinet & its documents such as:
• GA and Wiring drawings typical
• IO Assignment
• Cable schedule
• System Architecture
• FDS – DCS & SIS
• Heat & power calculation

Tinrhert Gas Development. (Algeria) (Apr 2024 to Aug 2024):

• Worked as Hardware engineer for DeltaV CIOC/CSLS CHARMS cabinets Pre-FAT & FAT that include test such as:
• Hardware visual & BOM checks
• Power & grounding check
• IO testing
• Diagnostics & redundancy checks
• Punch points closure

QChem & NAO Tank Farm Projects. (Qatar) (Feb 2024 - May 2024):

• Worked on modification of existing ICSS DeltaV M-series traditional IOs cabinets.
• Checking adequacy for DeltaV Network switches and DeltaV EIOC device.
• Worked on network cable schedule.
• Updated IO allocation as per revised IO list.
• Heat power calculation for RIE DCS cabinet.

Ras Laffan Petroleum & Pipeline Projects. (Qatar) (Jan 2024 - Mar 2024):

• Worked as an Interface engineer support for Polyethylene and Ethylene area REIs.
• Verify and review third-party interface documents.
• Co-ordinating with third-party vendor L&T for document update
• Worked on FOPP cable schedule documents for Ethylene and Polyethylene areas.
• Altona-Yarraville. (Australia) (Oct 2023 to February 2024):
• Worked as Hardware engineer on DeltaV CHARMS System cabinet and Server cabinet & its document such as:
• GA and Wiring drawings
• Heat & power calculations
• System Architecture

British Petroleum Programme. (Iraq) (Jul 2023 - Jan 2024):

• Worked as Hardware integration engineer (HIE) for BP DS Flare 02/03/04, BP DOG 07/08/09, KM400, KM500 and Qarmat Ali.
• Project kick-off meeting with project team
• BOM preparation w.r.t cabinet drawings.
• Tracking project material in coordination with procurement team.
• Periodically updating project team regarding project status
• Provide necessary inputs to production team and overseeing cabinet integration.
• Delivering cabinets with proper dispatch

Abu Qir Petroleum. (Egypt) (July 2023):

• Worked as Hardware engineer for DeltaV SLS1508 System/Marshalling cabinets Pre-FAT that include tests such as:
• Hardware visual & BOM checks
• Power & grounding check
• IO testing
• Diagnostics & redundancy checks
• Punch points closure

KOC/JPFS. (Kuwait) (June 2023):

• Worked as Hardware engineer for DeltaV CIOC/CSLS CHARMS cabinets Pre-FAT that include test such as:
• Hardware visual & BOM checks
• Power & grounding check

CO2 Capture Device. (Japan) (June 2023):

• Involved in cabinet design which included tentative HPC, BOM, GA drawing generation for proposal.

• Project Experience in Schneider Electric (Jul’22 – Feb’23):

Effluent Treatment Plant Paramount India Limited (Vadodara, GJ) (Aug 2022 - Feb 2023):

• In this project, engineering, and installation of Modicon M580 PAC control panels at site. Was responsible for below activities:
• Hardware drawing generation.
• IO assignment
• Iogs mapping in software.
• SCADA screens modification.

• Project Experience in Sikraft Infotech (Oct’18 – Jun’22):

Eneco WaWa Power Plant. Nuon Power Generation BV (Netherlands) (5 months):

• Modernization of existing ABB P14 control system to Siemens SPPA-T3000 DCS. Was responsible for below activities:
• Preparation of HMI standards.
• Implementation of HMI displays w.r.t reference pictures and P&ID.
• Quality checks of implemented HMI displays.
• Cabinet and loop drawings generation

Goldenberg-werk Power Plant. RWE Power AG (Germany) (9 months):

• Modernization of existing Siemens Teleperm M control system to Siemens SPPA-T3000 DCS. Was responsible for below activities:
• Hardware typical identification.
• Channel assignment.
• Spare calculation
• Cabinet and loop drawings generation
• Quality checks for hardware drawings
• Report generation.
• After commissioning activities redlines implementation

Jeju PG (South Korea). Korea Midland Power Co. (5 months):

• Upgradation of existing Siemens PCST system to Siemens SPPA-T3000 DCS. Was responsible for below activities:
• Preparation of HMI standards.
• Implementation of HMI displays w.r.t reference pictures and P&ID.
• Quality checks of implemented HMI displays.
• Analysis of PCST software plans and comparing with available standard library.
• Conversion and modification of old logic into SPPA-T3000 with old functionality intact.
• Quality checks of software plans.

Al-Taweelah A1 Power and Desalination Plant. Gulf Total Tractebel Power Company (UAE) (1.5 years):

• Modernization & Migration of existing legacy system to Siemens SPPA-T3000 DCS. Was responsible for below activities:
• Preparation of concept documents and engineering standards.
• Creation of IO database
• Hardware typical identification
• Raising LOPs and clarification.
• Channel assignment.
• Spare calculation
• Cabinet and loop drawings generation
• Quality checks for hardware drawings
• Implementation of HMI displays w.r.t P&ID.
• Quality checks of implemented HMI displays.
• Software logic implementation w.r.t SAMA and control philosophy
• Channel assignment.

Bayswater Power Station. AGL Macquarie (Australia) (1 month):

• In this project, engineering of Siemens FUM/SIM cabinets. Was responsible for below activities:
• Modification of hardware drawings
• Quality checks of hardware drawings
• As-built documentation

Jebel Ali G Station. Dubai Electricity & Water Authority (UAE) (3 months):

• Modernization of existing Siemens Teleperm control system to Siemens SPPA-T3000 DCS. Was responsible for below activities:
• Updating IO database
• Creating hierarchy w.r.t folder structure in SPPA-T3000
• Creation and modification of software typical
• Industry Experience
• Powerplant
• Water Treatment
• Oil & Gas
• Overall Experience